Stock Exhaust valve?

[Xtim8719X]

I ordered myself a Two Brothers M2 slip-on pipe a few days ago and it should be in tomorrow, so i went ahead and took off my stock exhaust tonight. While doing so i removed the exhaust valve thats attached to the stock exhaust. Can anyone tell me if that gets re-installed on the new exhaust, or do they eliminate that with aftermarket systems??? :confused2:

[cowboyadam]

Toss it in the garbage along with the cables. Your new exhaust will replace that portion of the pipe.

Also, dont mess with the servo motor. Just leave it on the bike. It will turn your code light on.

[Xtim8719X]

Toss it in the garbage along with the cables. Your new exhaust will replace that portion of the pipe.

Also, dont mess with the servo motor. Just leave it on the bike. It will turn your code light on.


Sweet, i dont think i could had figured out how it came apart to put it back together anyway! Thanks! :)

[O.A. for life]

Ya i wish i had that info when i did mine. I went to all the trouble to remove the servo. . . put it all together and fired it up and the light came on. It took me 2 days to figure it out (duh).:shortbus:

[Xtim8719X]

While reading up on removing the exhaust valve, i noticed people talking alot about also removing some sort of an intake flapper also... anyone have any info on that? Does it help/hurt?

[Repsol47]

While reading up on removing the exhaust valve, i noticed people talking alot about also removing some sort of an intake flapper also... anyone have any info on that? Does it help/hurt?

Read this bro.
http://www.hooliganbiketech.net/hondacbr1000rrweb/1000RR_frameindex.htm

Or this one:
http://www.hooliganbiketech.net/hondacbr1000rrweb/1000RR_frameindex.htm

Not sure which one you were referring to.

[hondahoon]

make sure you remove the cables when you do this if you dont they have a tendancy to get snagged & that can cause all sorts of unwanted problems....

HH

[Xtim8719X]

Thanks for all the help, i got the new exhaust installed :D And everything is working good. I highly suggest the 2 brothers M2 slip on! Very good sounding pipe. I also did the intake flapper mod, and it does make a noticable difference, if you haven't done so yet, you should do that too!

[Repsol47]

Thanks for all the help, i got the new exhaust installed :D And everything is working good. I highly suggest the 2 brothers M2 slip on! Very good sounding pipe. I also did the intake flapper mod, and it does make a noticable difference, if you haven't done so yet, you should do that too!


Good job....pic of that exhaust would be nice:p
So....whats next?

[Xtim8719X]

I should have some pics up tonight, if not maybe tomorrow... I recently added the OEM seat cowl...Next will probably be a PCIII and some flush-mount front sigs. Who's knows where i'll go from there... i dont know about anyone else, but i think a turbo on a repsol would be absolutely sweet! :D :eek:

[TX Repsol]

i dont know about anyone else, but i think a turbo on a repsol would be absolutely sweet! :D :eek:

I would love it - but for the money, I'd buy a second bike, build a motor for the Mustang, or something!

Have you seen some of the turbo sportbike videos on youtube? There's an R1 on there that just can't keep the front wheel down. He rolls on the throttle at triple digits and the front wheel pops right up.

It would be fun, though probably annoying after a while. Kinda like Hondahoon! :p

[LilTuffGirl]

Hmm so Tim is not glued to Guitar Hero III and said I had to take pictures and post them. So here I am invading the Repsol forum to post pics ;)
We didn't take it out of the garage since we were working on the mustang for most of the time and it was just too damn cold. But you get the idea from these pics.

http://www.ladysstall.com/bikes/repsolnaked1.jpg
http://www.ladysstall.com/bikes/repsolass.jpg
http://www.ladysstall.com/bikes/repsolexhaust1.jpg
http://www.ladysstall.com/bikes/repsolexhaust2.jpg
http://www.ladysstall.com/bikes/repsolexhaust3.jpg
http://www.ladysstall.com/bikes/repsoltail.jpg


We really need to get a sound clip on here. It sounds so damn good! And I thought the 600 was loud.. hah!

[cowboyadam]

That Two Bros looks good. Just a little too loud for me.

Oh yeah.... Welcome to the site

[TX Repsol]

So here I am invading the Repsol forum to post pics ;)

Welcome Nikki - don't let the leg-humping you will soon receive by the Aussies force you away!

[Nakkers]

We wouldn't pick on Nikki. Wishing you & Tim all the best and I hope you stick around, its all good !

[hondapowered]

I should have some pics up tonight, if not maybe tomorrow... I recently added the OEM seat cowl...Next will probably be a PCIII and some flush-mount front sigs. Who's knows where i'll go from there... i dont know about anyone else, but i think a turbo on a repsol would be absolutely sweet! :D :eek:

this month in super street bike magazine they hvae a turbo charged blackbird 100XX and some sick CBR 1000rr also turbo set up big nasty silver chambered turbine sitting low in the front just screaming and making train whistle sounds WOA MAMA :D

[Repsol47]

Hmm so Tim is not glued to Guitar Hero III and said I had to take pictures and post them. So here I am invading the Repsol forum to post pics ;)
We didn't take it out of the garage since we were working on the mustang for most of the time and it was just too damn cold. But you get the idea from these pics.

http://www.ladysstall.com/bikes/repsolnaked1.jpg
http://www.ladysstall.com/bikes/repsolass.jpg
http://www.ladysstall.com/bikes/repsolexhaust1.jpg
http://www.ladysstall.com/bikes/repsolexhaust2.jpg
http://www.ladysstall.com/bikes/repsolexhaust3.jpg
http://www.ladysstall.com/bikes/repsoltail.jpg


We really need to get a sound clip on here. It sounds so damn good! And I thought the 600 was loud.. hah!

Welcome to the site....good looking pics.

[LilTuffGirl]

That Two Bros looks good. Just a little too loud for me.

Oh yeah.... Welcome to the site
Thanks

And too loud?? :weirdface:
I think it sounds pretty damn sexy! It's a saftey thing! You want the cars to hear you ;) lol

I just wish the 600 could have that low tone to it.

[jet2233]

Two bros sounds great I wish I had got it instead of the Jardine carbon.

[O.A. for life]

Thanks

And too loud?? :weirdface:
I think it sounds pretty damn sexy! It's a saftey thing! You want the cars to hear you ;) lol

I just wish the 600 could have that low tone to it.

Fact. . loud pipes save lives!:D

[cowboyadam]

Thanks

And too loud?? :weirdface:
I think it sounds pretty damn sexy! It's a saftey thing! You want the cars to hear you ;) lol

I just wish the 600 could have that low tone to it.

My Arata is plenty loud, just a better sounding loud to me. I like the lower mellow loud, not the

kackly "rice burner" loud like 2 bros. Just my preference though. Heard on the other day and

was glad I went the route I did. Great sound and makes more power than any other pipe for these bikes.

As for the safety issue, yes you will hear a louder bike... doesent always mean people in cars

are listening though.

Glad you like it though.

[LilTuffGirl]

Have you heard the two brothers on the 1000?? It isn't rice burner at all. Not the one he has.

I brought the camera with us today but uhm.. it was dead. hah :mad: I was going to take some vid..

[cowboyadam]

Have you heard the two brothers on the 1000?? It isn't rice burner at all. Not the one he has.

I brought the camera with us today but uhm.. it was dead. hah :mad: I was going to take some vid..

Yes, last week. Just sayin I didnt like the sound plus the minimal performance gains turned

me away from buyin the pipe.