GP style exhaust

[O.A. for life]

Well here are the parts and the process of install. This is loud!! But i love it.
Just have to get it ceramic coated next week.

[TX Repsol]

That didn't take long!

Can you post a video of it? I'd like to see it from more angles...

Is it obnoxiously loud?

[Repsoul]

Dude, looks friggin' sweet!!

Pics would look better if your tools were picked up!! :eek:

(Sorry, that's the shop sup coming out in me...:D)

[fredie]

thats going too be so loud :eek:

[Repsol47]

Well here are the parts and the process of install. This is loud!! But i love it.
Just have to get it ceramic coated next week.

Ok....soooooooo....whats it gonna cost to mass produce those for the rest of us?:D

[O.A. for life]

its pretty damn loud! It has some packing to lessen the blow but i love it. I will get some video, but how do i post a video?

[Hondaman69]

Ok....soooooooo....whats it gonna cost to mass produce those for the rest of us?:D

Yah hook us up. that is sweet looking and a video would be great so we can see how loud you are talking about.
:D:D:D:D

[TX Repsol]

its pretty damn loud! It has some packing to lessen the blow but i love it. I will get some video, but how do i post a video?

You have to host it on another site, like youtube, and then post a link here. You can embed it in a post by pasting in the link, highlighting it, and pressing the # button at the top to wrap it in code brackets.

Chop chop.

[hondapowered]

SOOOOO LOUD I met a guy who did this with ceramic headers and you could not stand next to the bike it was like being down at the race track :evilgrin:

How much wieght did that eliminate? Improved flickability like a 600cc I am sure>>>>>>>>>>>>

[O.A. for life]

I will try tomorrow to get a vid up.

[Teamzigen]

Very NICE!!!

[ZZGIXXER]

VERY NICE INDEED !!!

[exit90a]

Very nice!! Must take a lot of commitment to chop up your stock exhaust like that. As far as noise is concerned, loud bikes are like loud girls, if they look good does it realy matter?;)

[Hondaman69]

I will try tomorrow to get a vid up.

wheres that video?

[O.A. for life]

Sorry guys! i didnt get a chance to shoot video today but i built a diffuser that cut the sound in half. It will be a removable item for the just in case (cops, angry neighbors, ect). it will hurt performance a little, but i dont think very much . It felt the same on a road test but i wont run it unless i have a reason. . . i like it loud!! :evilgrin:
I actually drilled the holes bigger after this photo.
sorry if these pics are not up to par, they are cell phone pics

[Hondaman69]

Looks good man, I cant wait to hear it.:eek::D:eek:

[marccbr]

I like the looks, but it would have to be no louder than my Jardine since that is already loud enough.

[Repsol47]

Sorry guys! i didnt get a chance to shoot video today but i built a diffuser that cut the sound in half. It will be a removable item for the just in case (cops, angry neighbors, ect). it will hurt performance a little, but i dont think very much . It felt the same on a road test but i wont run it unless i have a reason. . . i like it loud!! :evilgrin:
I actually drilled the holes bigger after this photo.
sorry if these pics are not up to par, they are cell phone pics



Im really beginning to like it...can ya make a spare one....and send to me:p

[O.A. for life]

Im really beginning to like it...can ya make a spare one....and send to me:p

because the header has to be modified, and has to be fitted just right. . . you would have to send your header and right lower plastics to me to build another and have it fit. Remember that the plastic has been cut (so no going back) and permanent modification to the header

[O.A. for life]

I like the looks, but it would have to be no louder than my Jardine since that is already loud enough.

Its quite a bit louder than my old jardine with 1.5 inches shortened.

[TX Repsol]

Have you made any progress on the tail section?

I'm anxious to see it with the cleaned up HotBodies undertail...

[O.A. for life]

Have you made any progress on the tail section?

I'm anxious to see it with the cleaned up HotBodies undertail...

To much for me to buy right now. I am shopping ebay and waiting to find a deal on a used one instead of paying $200 for one from Hotbodies and then cutting it up.

[DavesRepsol]

That is exactly what I am wanting to do, LOOKS GREAT.........what did you use to cut the lower fairing?

What are you thinking about charging to do this for one of us?

[Hondaman69]

That is exactly what I am wanting to do, LOOKS GREAT.........what did you use to cut the lower fairing?

What are you thinking about charging to do this for one of us?

I am interested too, also would you have to cut the fairing on an 07?:confused2:

[O.A. for life]

I used a dremel tool and it took about 4 tries to get it right. i just took small steps. I dont know about the 07' fairings.
I would prob have to get in the neighborhood of $400-$450 to build with the cost of ceramic coating, parts and time

[TX Repsol]

I'd like to hear it - you coming to Texas any time soon? :D

I wonder if the exhaust could be pointed a little more rearward? I think it would be sweet if the exhaust were almost hidden and the tail section we cleaned up with the worked over HotBodies undertail...

[O.A. for life]

I'd like to hear it - you coming to Texas any time soon? :D

I wonder if the exhaust could be pointed a little more rearward? I think it would be sweet if the exhaust were almost hidden and the tail section we cleaned up with the worked over HotBodies undertail...
Once its all blacked out it will be very hidden. i will get some video tomorrow. I have been waiting for the wife so she can get me riding past the camera.

[TX Repsol]

Once its all blacked out it will be very hidden. i will get some video tomorrow. I have been waiting for the wife so she can get me riding past the camera.

Ah ha - you're going to coat it black? That should be nice...

[marccbr]

Damn, can't wait to see the vid. That is going to look so sweet all black. You should think about mass producing it. Is it possible to get more packing underneath the bike to quite it down a bit?

[hondapowered]

Once its all blacked out it will be very hidden. i will get some video tomorrow. I have been waiting for the wife so she can get me riding past the camera.

That is gonna be sick and works very well wiht the black swingarm NICE :evilgrin:

[O.A. for life]

YouTube - motogp exhaust
Quality not that great but you get the idea!

[hondapowered]

THAT F'ING ROCKS :evilgrin: SO SICK :evilgrin: BADD ARSE :evilgrin:

[Hondaman69]

Damn, you would have to post this while I am at work and unable to watch it, but I will take a look at it tonight and let you know what I really think. cant wait to see it though.

[Nakkers]

Wow . So are you happy with it O.A , sure is loud so do you think its affected anything, for instance back pressures etc does it go just as hard as before or harder :dblthumbsup:

[1eyebrother]

Holy **** man...I think I really need 1....I sent ya a PM...been lookin for a pipe and I think I found one.....

[cowboyadam]

That sounds better than I expected. A little loud but good none the less. Good work man. You

might make some $$ off that fo sho.

[hondapowered]

Wow . So are you happy with it O.A , sure is loud so do you think its affected anything, for instance back pressures etc does it go just as hard as before or harder :dblthumbsup:

How does this thing pull now? How much wieght did you loose? Did the idle change or any difference in operating temps? DO you have a PC? Did you change your map? :confused2::confused2::confused2:

[O.A. for life]

I figure i dropped about 3 lbs and the throttle is much more responsive. I mounted the diffuser plate now that the holes are drilled bigger and its much quieter with it in and dont feel any loss of power. I am excited about this!! once its coated and reinstalled i will post finished pics. . . but so far i friggin love it. Once its all done i will take it to the race shop in vegas and have it dyno tested and have them build a custom map for it.:dblthumbsup:

[hondapowered]

AWESOME BRO you got a good jump on a whole lot of other CBR'S now :evilgrin:

[Repsol47]

That pipe is bitchin....I think I know what I will do with my spare header.:p

[DavesRepsol]

YouTube - motogp exhaust (http://www.youtube.com/watch?v=ko_rCeaE2zI)
Quality not that great but you get the idea!

That is F_cking AWESOME DUDE..........LOVE IT:D:D:D

[Hondaman69]

Dude I just got home and watched it, and I love it. let us know about the specs after you get it tested. I would definately want one.

:eek::D:D:D:D:eek:

[marccbr]

That sound and looks bad ass. It dosen't sound ass loud as I thought it would, maybe its just the video recording. If the dyno goes right you may have a money maker in your hands. You would probably have to find some way of simplifying the install. You could probably sell it as a full exhaust the only trick would be cutting the fairing.

[ZZGIXXER]

remember guys.....that if you get caught with an after market pipe. and the cops want to give you a hard time....fixing it ticket or citation can be cited on the spot......and changes would have to be made to the pipe and bike. unless your ready to pay a high fine....over $250 if the pipe has no dot #s written on them.

all depends from the officer if he wants to be a major ''D''.

[TX Repsol]

Hey Troy - nice work on the video.

One question: was that with the diffuser or without?

[Hondaman69]

remember guys.....that if you get caught with an after market pipe. and the cops want to give you a hard time....fixing it ticket or citation can be cited on the spot......and changes would have to be made to the pipe and bike. unless your ready to pay a high fine....over $250 if the pipe has no dot #s written on them.

all depends from the officer if he wants to be a major ''D''.

well I never heard of a cop pulling over someone for having a loud pipe in all the years I have been riding. I have had some cops pull me over for speeding and ask about the pipe, but they were not jerks about it.
Also what do you mean about dot #'s on them?:confused2:

[ZZGIXXER]

well I never heard of a cop pulling over someone for having a loud pipe in all the years I have been riding. I have had some cops pull me over for speeding and ask about the pipe, but they were not jerks about it.
Also what do you mean about dot #'s on them?:confused2:

every stock pipe comes with dot # stamp on the pipe and some warning logos.

back in 90's.......i used to get pull over in Southern calif. some time for the pipe and some times cause i look so fast and suspicious. nowa days, it is difficult to get pull over just for the pipe.....but if the cops want to give you a hard time and act like a majo "d"......then yes you could be in trouble.

[ZZGIXXER]

that pipe sounds very nice......i would like to hear that at 10k rpm. that must be so loud.

[exit90a]

If Hotbodies does not un-f:censored: these issues(see below), I may bin their exhaust, rework the undertail and apply one of your outlet/silencers if you are willing to build another. To simplify the process, I would modify my header and fairing, and you could send me your part ready to fit. I'm going to give HB a few days to fix this. If you are interested, I'll get back with ya. Thanks!!


Re: D&D Slip on

--------------------------------------------------------------------------------

Sorry guys, but I have to vent. I got my HB exhaust Friday and began the install at 5:30 that evening after going to Auto Zone to get some heat reflecting tape. The kit came with a piece 4 inches wide and maybe 2.5 feet long. Try to cover the plastic surrounding the pipe with that!! Ok, not a good start for a $650 kit. Spent 45 min. applying tape so I could rest easy about heat issues and really got it covered well. Next step is mount the pipe.... Yeah. So, I locate their S bend pipe and attempt to "slip" it on the stock mid-pipe as per instructions. Not gonna happen as they seem to share the same ID(inside diameter 1-15/16in). So, I call HB for tech support. Got Jeff on the line. Jeff says to "modify one or both pipes" or send HB the defective S bend for analysis. Did I mention I recently quit smoking and have only had 4 hours of sleep? The HB exhaust is ceramic coated inside and out so I decide to remove this at the junction to increase S bend ID. First sand paper and on to a grind wheel on my power drill. Closer, but still not happening. I end upcutting 3 slits in the end of stock mid pipe, line the 2 up and bang them together. Wiggle them into position, line up/slip on silencer and tighten all clamps. Ok, now we are getting some where. Start up bike and check for exhaust leaks. None at the joints cause I used Permatex Ultra Copper to seal them. However, it does have 2 leaks where the end cap fits in(this part is pre-assembled by HB)!! Mother F. It's 9:00pm now and I have to get ready for work. Thought I would just line up the undertail(orange, bike is red!) to see how it looks real quick. No, the silencer sits about 1/2in too low for it to line up!! OMFG!!! I'm not new at this stuff. I've been riding 25 plus years and do all my own work plus some on the side (for $$$). People, this is the most poorly designed/constructed aftermarket POS I have EVER dealt with. Maybe my case is an anomaly? I get off work in half hour and I'll take it apart and start over. Maybe it worked itself out over night? More to follow.

[O.A. for life]

Hey Troy - nice work on the video.

One question: was that with the diffuser or without?

that is without. I put the diffuser on for a day and cruised around a little, then pulled it off. sending it to ceramic coater tuesday.

[O.A. for life]

If Hotbodies does not un-f:censored: these issues(see below), I may bin their exhaust, rework the undertail and apply one of your outlet/silencers if you are willing to build another. To simplify the process, I would modify my header and fairing, and you could send me your part ready to fit. I'm going to give HB a few days to fix this. If you are interested, I'll get back with ya. Thanks!!


Re: D&D Slip on

--------------------------------------------------------------------------------

Sorry guys, but I have to vent. I got my HB exhaust Friday and began the install at 5:30 that evening after going to Auto Zone to get some heat reflecting tape. The kit came with a piece 4 inches wide and maybe 2.5 feet long. Try to cover the plastic surrounding the pipe with that!! Ok, not a good start for a $650 kit. Spent 45 min. applying tape so I could rest easy about heat issues and really got it covered well. Next step is mount the pipe.... Yeah. So, I locate their S bend pipe and attempt to "slip" it on the stock mid-pipe as per instructions. Not gonna happen as they seem to share the same ID(inside diameter 1-15/16in). So, I call HB for tech support. Got Jeff on the line. Jeff says to "modify one or both pipes" or send HB the defective S bend for analysis. Did I mention I recently quit smoking and have only had 4 hours of sleep? The HB exhaust is ceramic coated inside and out so I decide to remove this at the junction to increase S bend ID. First sand paper and on to a grind wheel on my power drill. Closer, but still not happening. I end upcutting 3 slits in the end of stock mid pipe, line the 2 up and bang them together. Wiggle them into position, line up/slip on silencer and tighten all clamps. Ok, now we are getting some where. Start up bike and check for exhaust leaks. None at the joints cause I used Permatex Ultra Copper to seal them. However, it does have 2 leaks where the end cap fits in(this part is pre-assembled by HB)!! Mother F. It's 9:00pm now and I have to get ready for work. Thought I would just line up the undertail(orange, bike is red!) to see how it looks real quick. No, the silencer sits about 1/2in too low for it to line up!! OMFG!!! I'm not new at this stuff. I've been riding 25 plus years and do all my own work plus some on the side (for $$$). People, this is the most poorly designed/constructed aftermarket POS I have EVER dealt with. Maybe my case is an anomaly? I get off work in half hour and I'll take it apart and start over. Maybe it worked itself out over night? More to follow.

I am sure we can work something out.

[Hondaman69]

Hey troy have you had you bike dynoed with that new exhaust yet?
kind of anxious to hear the results.:D:D

[O.A. for life]

no its at the ceramic coater and prob wont be done till monday. Then it will take me a while to get to vegas and get that done

[justanother1]

Have you guys taken a look at the Ladybird GP exhaust. Its also suppose to be real loud! I have one on order right now. By the way, nice pipe and sound!

[TX Repsol]

no its at the ceramic coater and prob wont be done till monday. Then it will take me a while to get to vegas and get that done

Uhm, where are the updated pics! :p

4479

[O.A. for life]

Uhm, where are the updated pics! :p

4479

Still waiting for the coater! He is dragging his feet! :mad:

[Hondaman69]

Tex dont worry about the pics.
You need to worry about him building you one after he builds me one.
:eek::D:eek:

[TX Repsol]

Tex dont worry about the pics.
You need to worry about him building you one after he builds me one.
:eek::D:eek:

Go read post number 10 here (http://www.repsolforum.com/forums/showthread.php?t=1485&referrerid=138) sweetums... ;)

[Hondaman69]

Oops Troy I guess you didn't tell Tex about our agreement.:eek::D:eek:

[O.A. for life]

dont bring me into this :eek::D

[Hondaman69]

Just kiddin Tex.:D:p:D
I know you have got first dibs. I still have to get my bike in May. I just wonder if there could be any way to modify this on an 07 without cutting any of the bottom fairing?

[O.A. for life]

It will prob fit the 07' without cutting.

[Hondaman69]

Good then considering I was sweating it a little about cutting the plastics.
:D:D:D

[O.A. for life]

Wussy! :p:D

[TX Repsol]

I just wonder if there could be any way to modify this on an 07 without cutting any of the bottom fairing?

It will prob fit the 07' without cutting.

Good then considering I was sweating it a little about cutting the plastics.
:D:D:D

Wussy! :p:D

I took a long, hard look at my bike, wondering the same thing... guess that makes me a "wussy" too!! :D

I know where I can get a stock header to butcher... in case i ever need to go back.

[Hondaman69]

well all I know is I want an exhaust that can be heard, but I would also like to know about the horsepower gain as soon as he gets the info. If I have to get extra parts for this then I guess that is ok considering that it would be a killer modification and be worth it in the long run.
:D:D

[mccreadyt]

wow great job on that exhaust !

[Nakkers]

I'm still wondering if this mod may have lost either torque or horsepower because of the loss in back pressure :confused2:

[TX Repsol]

I'm still wondering if this mod may have lost either torque or horsepower because of the loss in back pressure :confused2:

Per several of his posts above, Troy's trying to get it to a dyno so he can answer that question for us.

If it's even with stock, or better than stock, I may be doing this to the '07. IF I can keep it from sounding like 20 bikes running down the road... don't want a super loud bike.

[Repsol47]

Per several of his posts above, Troy's trying to get it to a dyno so he can answer that question for us.

If it's even with stock, or better than stock, I may be doing this to the '07. IF I can keep it from sounding like 20 bikes running down the road... don't want a super loud bike.

Wussy! :p:D

:pound:

[Hondaman69]

don't want a super loud bike.

come on tex you gotta know that super loud pipes not only save lives, but they turn some heads.:D:D:D

[TX Repsol]

come on tex you gotta know that super loud pipes not only save lives, but they turn some heads.:D:D:D

Yeah, every cop within 5 miles is constantly looking for your ass...

The way I ride, I can't afford a loud bike. I'd constantly be chased.

[Hondaman69]

well if you are worried about the cops chasing you then you need to hook-up something to the rear of your bike that launches out donuts at them, and they are sure to stop and save those donuts just ask HH.:D:D:D:D

[O.A. for life]

Its loud but it is baffled. most of the harleys around here cant say that and they have always got away with strait pipes. utah inspection states that it must have a baffle and i have that.
I contacted the guy in vegas that does allot the big name racers bikes and he will dyno and build me a full custom map for $150 to $200 so i am saving and will try to get down there in a couple weeks. I will be happy no matter what. . . the throttle response is great. it revs faster and comes down faster and under full throttle it sounds so throaty.:D

[Hondaman69]

Its loud but it is baffled. most of the harleys around here cant say that and they have always got away with strait pipes. utah inspection states that it must have a baffle and i have that.
I contacted the guy in vegas that does allot the big name racers bikes and he will dyno and build me a full custom map for $150 to $200 so i am saving and will try to get down there in a couple weeks. I will be happy no matter what. . . the throttle response is great. it revs faster and comes down faster and under full throttle it sounds so throaty.:D

thats ok, just let us know what you find out about the specs. Also what does that mean that its baffled?:confused2: I know i'm going to get ripped apart on this question.

[O.A. for life]

A perforated chamber with fiberglass or steel wool packing inside the pipe to dampen the sound.

[Hondaman69]

Ok now I see what you are talking about.

[TX Repsol]

Update please... :)

[dwdrummer]

WOW!!! Need to hear it with the baffle installed.. also is going to be a clamp-on install or does it need to be welded???.......And could you cut it to sit flusher with the fairing coming out...how much does it stick out through the fairing???

[O.A. for life]

Sorry guys. . .been out of town for a bit. Still trying to get to vegas. have not had the time to go cuz it has to be during the week. I have been riding quite a bit though and its just right for me. No police action and ridden next to them a few times both in cruisers and cycles and i get no grief. My undertail showed up while i was gone so i will start working on that as well.

[Hondaman69]

sounds good let us see some pics after the install.

[O.A. for life]

Finally got it installed this afternoon. While i was installing i decided to give myself some more trunk space since the pipe is no longer there also. . . .

[Hondaman69]

hold on a minute I got to go cleam myself up after looking at those killer pics.
:D:D:D:D

[hondapowered]

:dblthumbsup::mod::sweet::You_Rock::coolsun:


You get the idea nice work Mr.Troy that is a huge step for HONDA guys everywhere..... It can be done we have the technology :evilgrin:

[Nakkers]

Looking good troy, how long til ya get her on the dyno !

[DavesRepsol]

I'm still wondering if this mod may have lost either torque or horsepower because of the loss in back pressure :confused2:

If I remember correctly I spoke with Diel a while back about the back pressure issue and to my knowledge there is none required for these engines, but because of the air flow change you must incorporate a power commander with a custom map after installing exhaust such as this.


LOOKS FREAKING AWESOME TROY.....KEEP UP THE GOOD WORK

[Nakkers]

If I remember correctly I spoke with Diel a while back about the back pressure issue and to my knowledge there is none required for these engines, but because of the air flow change you must incorporate a power commander with a custom map after installing exhaust such as this.


LOOKS FREAKING AWESOME TROY.....KEEP UP THE GOOD WORK

If thats what Diel says thats good enough for me !

[Repsol47]

Finally got it installed this afternoon. While i was installing i decided to give myself some more trunk space since the pipe is no longer there also. . . .


Very nice job...what did you use to fill in the hole?

[O.A. for life]

its a plastic repair compound made by fusor. Its body shop grade for plastic bumper repair where structure strength is needed. I use it for cracks in plastic bumpers.

[dwdrummer]

Is that a Repsol sticker underneath or did you paint it on?? Also the exhaust will it be a.. weld-on.. install or...slip-on???

[1eyebrother]

Is that a Repsol sticker underneath or did you paint it on?? Also the exhaust will it be a.. weld-on.. install or...slip-on???

I think it is a sticker...I have about 15 of those that I got from laguna last year......

[Repsol47]

Finally got it installed this afternoon. While i was installing i decided to give myself some more trunk space since the pipe is no longer there also. . . .

Id like to see a pic of the right side of the bike...at a distance.
Wanna admire the complete setup...undertail and exhaust.:D

[O.A. for life]

Is that a Repsol sticker underneath or did you paint it on?? Also the exhaust will it be a.. weld-on.. install or...slip-on???

stickers under clear.

[dwdrummer]

Troy, is the pipe going to be a weld-on set-up or slip-on that can be done by anyone???stickers under clear.

[O.A. for life]

Troy, is the pipe going to be a weld-on set-up or slip-on that can be done by anyone???

Its all weld on.

[O.A. for life]

Id like to see a pic of the right side of the bike...at a distance.
Wanna admire the complete setup...undertail and exhaust.:D

she is dirty so dont hold that against me!:D

[Big Kahuna]

Hot damn bro, the bike is kickin'!!!!

You going to Laguna again this year? Can't wait to see and hear it in person!

[rubenzfast]

The bike looks ****in badd ass the video is sick i wanna know when yer done i think i want one too

[dwdrummer]

That look HOT!!! We need a video with the baffle in so we can hear it...When are you going to start producing these??? I want one..Can we get a price???

[hondapowered]

TROY NICE WORK the bike looks so stealthy witht the a$$ tight'nd up like that woops you get the idea :D

Honda should have taken a poll from us and the 2008 would have looked alot like this :dblthumbsup::You_Rock::jaw:

[Jacobs Dad]

she is dirty so dont hold that against me!:D

I see no dirt? All I see is an 05' that would actually make me consider getting an 05'. Superb top notch work my man. Or in spanish "Me Gusta". (I like)

You are the king baby!!!!!!

[MikeR]

Brother that looks sooo sweet.
I think you have to start selling those pipes. You will have a great business going.

[Repsol47]

she is dirty so dont hold that against me!:D

Thats what I want my Repsol to look like when she grows up.:D

[O.A. for life]

A humble thanks to you all!!

No B.K. we cant make it this year cuz its been a rough one so far and no time to save up.:(

The video i posted is with the baffle in. Its welded together so i had to do all that before installation. The diffuser is bolt on and i will have to get a vid of that later.

[areomil]

that is without a doubt the coolest exhaust i have ever seen thats exactly what i want. how much

[O.A. for life]

that is without a doubt the coolest exhaust i have ever seen thats exactly what i want. how much

Still working out the details but $400 to $450 without the undertail and i am working on a price for the undertail as well. And i need your stock header to modify.

[areomil]

what about the pc map and number gains. have you worked that out yet?

[hondapowered]

:doh: if you read back thru the thread big Troy has mentioned why he has not finished mapping and just to get the rear end and exhuast to this point was alot of work. Stand By he will get the info :D

[O.A. for life]

:doh: if you read back thru the thread big Troy has mentioned why he has not finished mapping and just to get the rear end and exhuast to this point was alot of work. Stand By he will get the info :D

Thanks for gettin my back. .brotha!:)

[hondapowered]

what about the pc map and number gains. have you worked that out yet?

I did not mean to be gruff, I just know the poor guy has answered this over and over . HEY btw :welcome:

[areomil]

no worries man it would be a while till i had the money anyway. I am rebuilding my bike after a van ran me over just had to comment on this sick arsh exhaust. this thread is the whole reason i joined these forums.

[O.A. for life]

A new video since thats all i can afford to do right now!:)
YouTube - GP style custom exhaust

[hondapowered]

Looks SICK bro sounds even better , this would be a great mod for me the SATO full Ti system keeps buring thru the lower right. It takes about 3K or 4K miles but even with some heat shielding tape it comes right thru the HONDA on the bottom. I have tried everything, I think this would seriously help me out. I could probably sell the SATO system and just get some nice TI headers and butcher myslef a mid pipe and then finish the outlet like yours hmmmm.. guess I need a game plan, I was lucky that insurance replaced the last 2 plastics on the lower this one is on me. Thanks for the nice work TROY :D

[hondapowered]

no worries man it would be a while till i had the money anyway. I am rebuilding my bike after a van ran me over just had to comment on this sick arsh exhaust. this thread is the whole reason i joined these forums.

WOA a van ran over you? You were stopped or what? SUCKS nice to see we have a GATOR fan in the house from J-ville......:p Glad you are alright....

[Repsol47]

A new video since thats all i can afford to do right now!:)
YouTube - GP style custom exhaust (http://www.youtube.com/watch?v=VuQn23Z_YOo)


What Fender eliminator are ya sportin'?

[dwdrummer]

Oh Yea!!!! Sounds wicked!!! I need one.......

[O.A. for life]

What Fender eliminator are ya sportin'?

I dont know who makes it. I robbed it off the RC when i built one for hers that fit better. I mounted this one to the batt box and angled it back more

[Repsol47]

I dont know who makes it. I robbed it off the RC when i built one for hers that fit better. I mounted this one to the batt box and angled it back more

It looks like a Competition Werkes set up...thought maybe you could confirm that.:confused2:

[bikej]

This exhaust needs to be made for a 2007 and a bolt on please

tell me where to sign up

[O.A. for life]

the 07' and 05 header are the same. No it will never be a bolt on. Its not possible! The header has to be made to turn out instead of up. It has to be cut in "pie" cuts in about 5 places to make this possible, and it gets shortened as well. I wish it could be a slip on. . . i could make lots of money that way, buts its just not possible.

[bikej]

I wish for you to make lots of money off me :) What would you need to turn this into a slip?
too much work or just never possible?

[TX Repsol]

I wish for you to make lots of money off me :) What would you need to turn this into a slip?
too much work or just never possible?

Did you read O.A.'s last post (and the rest of this thread)?

It's a custom exhaust and cannot be made as a "slip-on". A true slip-on installation would have to bolt directly to your stock header, without modifying the stock header, which means it lives under the passenger seat.

If you want the ease of a slip-on, you're looking at under-seat exhaust.

[bikej]

Yes I did read the thread, I was partially saying sarcastically...
It's just so nice of a custom exhaust that's for sure...

[buster09841]

i saw this thread over on the 1000rr forum, I have to say that is awesome!

Troy, have you had any issues with the exhaust burning the lowers where it exits?

Also have you come up with a price to do the entire package...pipe and undertail? and what is the turn around time for you to do this?

[O.A. for life]

i saw this thread over on the 1000rr forum, I have to say that is awesome!

Troy, have you had any issues with the exhaust burning the lowers where it exits?

Also have you come up with a price to do the entire package...pipe and undertail? and what is the turn around time for you to do this?

What do they have to say over there about it?
No heat issues. when riding it is much cooler not running through all the extra pipe and burning your leg as well.
Take the time and read the whole thread and i'm sure most or all of questions will get answered.:)

[buster09841]

they have nothing but good things to say about it! i think it could possibly be the best looking setup i've seen. And i read the thread, you said that it would cost about 450 for the pipe and paint and what not, but you never mentioned if you were going to do the undertail as well (if we supply one that is)?

and i hate to ask you again but did you ever get the #'s on it from the dyno?

And i will probably be in touch with you after this season is over here in the Pa for that setup! just a heads up.

Brian

[O.A. for life]

they have nothing but good things to say about it! i think it could possibly be the best looking setup i've seen. And i read the thread, you said that it would cost about 450 for the pipe and paint and what not, but you never mentioned if you were going to do the undertail as well (if we supply one that is)?

and i hate to ask you again but did you ever get the #'s on it from the dyno?

And i will probably be in touch with you after this season is over here in the Pa for that setup! just a heads up.

Brian

I am a Hotbodies dealer so i get plastic raw and mod and paint them for $260
I have not had the time or money to get to vegas for the dyno info. I have made and broke 2 appointments....but i will get down there soon!

[buster09841]

thanks for the info...man that is still a great price for what you get and the look it creates IMO. So i'll be ordering one from you this coming fall/winter, or whenever it get to cold to ride here, if that is okay with you of course!

Brian

[O.A. for life]

thanks for the info...man that is still a great price for what you get and the look it creates IMO. So i'll be ordering one from you this coming fall/winter, or whenever it get to cold to ride here, if that is okay with you of course!

Brian

You bet, i would love to build another! I will post the dyno info when i get it.

[TX Repsol]

.......and will try to get down there in a couple weeks.

Ahem! I'm going to keep bugging you.... :p

I'm seriously considering breaking my trend of silent bikes; got a PCIII on the way and will probably compliment it with exhaust and BMC filters...

Still curious to see how your custom pipe performs... chop chop! :D

[Vinnie]

Freakin Genius.
I got a 07 would love this.

[alpiniste]

must have an update, did you run this on the dyno yet?

[Brutus]

AWESOME O.A.!

And a well-done video. Usually on youtube the exhaust videos are a couple of revs at idle and that's it. Way to represent Reposl riders!

[benjigatman]

I just read this whole Dang Thread and all that I have to say is :drool::drool::drool:

Dang Son.... dang dang dang and double dang.........

Me likey :drool:

[O.A. for life]

Should have it dyno tested and map built at SEMA time. (first of november)

[gixxr750]

Should have it dyno tested and map built at SEMA time. (first of november)

anything on that map? i did something similar to my bike, but the map she's running is'nt all that good...

cheers ;)

[OLDZMAN]

anything on that map? i did something similar to my bike, but the map she's running is'nt all that good...

cheers ;)

:worthless:

[O.A. for life]

No:( to be honest i have been broke and have not ridden much at all lately, and never made it to SEMA this year. My bike runs great! Do you have any kind of silencer? Or down sizing of the tubing at all before the exit? Do you have a Power Comander? I had to richen mine a little but thats it.

[gixxr750]

its pretty much open, all i did was take my m4 slip on, chopped it up and welded it out the side. i'm running a map off the power commander site that works well, except for up top she hesitates. especially in 6th WOT around 9k is where you can reall feel her hesitate.

[The Doctor]

This is what I did with mine. A few of the guys saw it at Laguna.

[REPITUP]

This is what I did with mine. A few of the guys saw it at Laguna.

That Looks Great Chris!:D

[gixxr750]

No:( to be honest i have been broke and have not ridden much at all lately, and never made it to SEMA this year. My bike runs great! Do you have any kind of silencer? Or down sizing of the tubing at all before the exit? Do you have a Power Comander? I had to richen mine a little but thats it.

would you mind emailing me the map your using? I'd be interested in seeing how the bike feels with it. I'm scared of leaning the motor out with the one i'm runing now... sorry for the bad cell phone pic, but here's what she looks like.

[OLDZMAN]

This is what I did with mine. A few of the guys saw it at Laguna.

Looks very nice and clean love the look you got going Doc:sweet:

[The Doctor]

It look even better when I stick the #46's on it...:D:D:D:D:D

Thanks
Doc

[O.A. for life]

its pretty much open, all i did was take my m4 slip on, chopped it up and welded it out the side. i'm running a map off the power commander site that works well, except for up top she hesitates. especially in 6th WOT around 9k is where you can reall feel her hesitate.

Mine really comes to life up in that range! And your at a better altitude!?:confused2:

I am still running the map from my Jardine slip on w/aftermarket filters... just richened it up on the unit a couple bars and have not had a single issue yet. Which is why getting to the dyno has not happened yet. If it struggled anywhere in the rpm range, or had any performance issues i would have been forced to do something before now. I think the key is that i used a slightly smaller diameter baffle inside my silencer and it worked out to be a good compromise in back pressure to the shorter tubing and bends that it no longer has to push through.

[gixxr750]

Mine really comes to life up in that range! And your at a better altitude!?:confused2:

I am still running the map from my Jardine slip on w/aftermarket filters... just richened it up on the unit a couple bars and have not had a single issue yet. Which is why getting to the dyno has not happened yet. If it struggled anywhere in the rpm range, or had any performance issues i would have been forced to do something before now. I think the key is that i used a slightly smaller diameter baffle inside my silencer and it worked out to be a good compromise in back pressure to the shorter tubing and bends that it no longer has to push through.

honesly, i'm not familiar with fooling around with the fuel curves with the pc3... if you get a chance, i'd really appreciate if you could send me your map so i can give it a shot.

thanks again :cheers: