Broken Pazzo lever

[goracer]

Not sure if this goes here but it's the brake lever. I can no longer turn the switch by hand. I can use an alen wrench and by rotating the bolt it turns the switch. I have no idea what happened. I have no idea if there is a warranty or replacement peices can be burchased instead of the whole lever.

I beleive I bought them from the Repsol store but i'm not sure. It was from last years group buy. Anyhow I was looking for a fix. I didn't think I was the first this happened to.

[GothMog]

http://www.pazzoracing.com/contact.html

Give them a shout and see if they will warranty or sell ya the clicker/adjuster.

[goracer]

^ Thank you. I contacted them and got a response in an hour. They want to know when I purchased them. Will do a search for the group buy now. :)

[cowboyadam]

I sent my to CTS moto and they fixed it for me no problem. And I got a Pazzo res. sock

and a sticker. Great service!! Cant wait for those rotors :D

[goracer]

OK, the cleaning worked. I removed the nut and washer and chased them and the bolt a little bit then sprayed them. I sprayed inside the cracks of the switch with 3-N-1 at each position like five times rotating the lever back and forth for like a minute or two. So there was crud stuck in there not allowing it to rotate.

Pazzo replied several times and very quickly. They also provided with with contact information for warranty. So props to Pazzo for excellent customer service!

[TX Repsol]

OK, the cleaning worked. I removed the nut and washer and chased them and the bolt a little bit then sprayed them. I sprayed inside the cracks of the switch with 3-N-1 at each position like five times rotating the lever back and forth for like a minute or two. So there was crud stuck in there not allowing it to rotate.

Pazzo replied several times and very quickly. They also provided with with contact information for warranty. So props to Pazzo for excellent customer service!

Good info, in case I ever have any problems with mine... thanks for the post!

[GothMog]

OK, the cleaning worked. I removed the nut and washer and chased them and the bolt a little bit then sprayed them. I sprayed inside the cracks of the switch with 3-N-1 at each position like five times rotating the lever back and forth for like a minute or two. So there was crud stuck in there not allowing it to rotate.

Pazzo replied several times and very quickly. They also provided with with contact information for warranty. So props to Pazzo for excellent customer service!


So....what is the warranty?

[CTSmoto]

OK, the cleaning worked. I removed the nut and washer and chased them and the bolt a little bit then sprayed them. I sprayed inside the cracks of the switch with 3-N-1 at each position like five times rotating the lever back and forth for like a minute or two. So there was crud stuck in there not allowing it to rotate.

Pazzo replied several times and very quickly. They also provided with with contact information for warranty. So props to Pazzo for excellent customer service!


If you have nay problems drop me an email. We are the sole US distributor for Pazzo and we will take care of you guys.

Mike
CTSmoto