View Full Version : Repsol Decal tips
TheDead
June 11th, 2007, 08:53 AM
Ok, I want to put on my decals for my repsol. Is there any tips for putting these on. Like avoiding bubbles, putting them on straight etc. I not good with this kind of tedious stuff :confused2:. So i figure i learn to get better at it.
TX Repsol
June 11th, 2007, 11:25 AM
Ok, I want to put on my decals for my repsol. Is there any tips for putting these on. Like avoiding bubbles, putting them on straight etc. I not good with this kind of tedious stuff :confused2:. So i figure i learn to get better at it.
I'm not saying this to be an ass, so don't take it that way.
Use the search button - there are a couple of good threads on this topic with a lot of replies and good suggestions...
1eyebrother
June 12th, 2007, 06:46 AM
I took my bike to a place that specializes in decals and they put them on for 50.00 or 75.00 bucks, been awhile so I dont really remember, but they did a great job....
TX Repsol
June 12th, 2007, 01:48 PM
I took my bike to a place that specializes in decals and they put them on for 50.00 or 75.00 bucks, been awhile so I dont really remember, but they did a great job....
You said $50 in another thread a while back... don't go changing your story or we'll have another big fight on the board! :p:p:eek::p:p
cowboyadam
June 12th, 2007, 03:35 PM
You said $50 in another thread a while back... don't go changing your story or we'll have another big fight on the board! :p:p:eek::p:p
Closed thread #2???:eek: To be continued.....
1eyebrother
June 12th, 2007, 03:44 PM
You said $50 in another thread a while back... don't go changing your story or we'll have another big fight on the board! :p:p:eek::p:p
That is why I put 50.00 or 75.00 dollars because I wasnt sure and I didnt feel like searching for the original thread because I am lazy........:D
TX Repsol
June 12th, 2007, 07:04 PM
Closed thread #2???:eek: To be continued.....
Hey... nice new avatar! :D
Too bad she wasn't on an '07... :evilgrin:
cowboyadam
June 12th, 2007, 07:14 PM
Hey... nice new avatar! :D
Too bad she wasn't on an '07... :evilgrin:
Thanks. Shes more than welcome to come pose on mine any day. :D
TX Repsol
June 12th, 2007, 07:18 PM
Thanks. Shes more than welcome to come pose on mine any day. :D
On your what? :eek::eek::eek::eek:
OOPS - are we aloud to post PG-13 on the board?
cowboyadam
June 12th, 2007, 07:26 PM
Ooops, my '07 Honda Repsol that is. Hehe:evilgrin:. Well keep it PG for the
youngins.
leobarriola
July 31st, 2007, 11:10 PM
I make this decalc
The Doctor
August 1st, 2007, 08:15 AM
Hi Leo
You make which decal...........??????
Borofc
1eyebrother
August 1st, 2007, 08:49 AM
I make this decalc
:confused2:
The Doctor
August 1st, 2007, 08:54 AM
I make this decalc
In the words of the great TX
"Perhaps an introduction in the Newbie section would help"...........and also an explanation regarding decals...........;):D
Borofc
jquick
August 1st, 2007, 08:54 AM
Ok, I want to put on my decals for my repsol. Is there any tips for putting these on. Like avoiding bubbles, putting them on straight etc. I not good with this kind of tedious stuff :confused2:. So i figure i learn to get better at it.
what you can do is 4 cap full of baby shampoo into a normal sized water bottle and shake it up. this bottle is now called you slip solution. try to find a soft black tinters squeegee for application tool. if you can't find one let me know i can send you a few.
spray down the area of where you are going to install your sticker and clean surface with soft black squegee. (cleans surface from dirt) re-spray with slip solution and peel sticker backing off. place sticker on surface. at this point the sticker will NOT stick becuase of slip solution eneabling you to position the sticker at desired position. once in place use black squegee to apply vinyl sticker onto surface. DO NOT REMOVE THE TRANSFER TAPE IMEDIATLY. let it dry for a few minutes before you peel the transfer tape.
* i would try to apply a practice sticker to see if you feel comfortable with it, of not then try to find a professional tinter/ vinyl applicator to do the installations.
leobarriola
August 1st, 2007, 08:56 AM
sorry
I make decal windscreen
jquick
August 1st, 2007, 09:02 AM
sorry
I make decal windscreen
how much? what kinda plotter are you using??? cutter or printer? if you dont mind me asking
Repsol47
August 1st, 2007, 09:33 AM
Hey Playa,
Ive been meaning to ask ya....who the heck is your avatar?:confused2::weirdface::confused::eek:
jquick
August 1st, 2007, 09:35 AM
Hey Playa,
Ive been meaning to ask ya....who the heck is your avatar?:confused2::weirdface::confused::eek:
avitar is quicksilver
vBulletin® v3.7.3, Copyright ©2000-2009, Jelsoft Enterprises Ltd.