CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD

paul13131313 · July 29th, 2010, 11:22 PM

Found one on Taylormade Racing site for2009 GSX-R and called to find out if it fits 2009 CBR1000RR.Went over for fit check (work 5 miles away) and found bolt hole near edge of tab.Paul took phone number and said he'd call in a couple of weeks when untrimmed part is ready.
Called two days later to come over for fitting.He trimmed an existing part,let me mark the hole placement,drilled the hole,checked fit ,made final fit and finish adjustments,and let me install it for the last time..He took pattern measurements to produce more.
I have no interest in drilling holes on swingarm and have seen this design in thick sheetmetal also.while looking for it ,I came across this.
It cost $71.34 and neither Kristie (email phone/contact) or Paul himself would accept any extra for the master's hour of cheerfull adjustment.He remarked "that's the fun part!".

Oh,and by the way,theirs dozens of exhaust components being assembled for shipment,yes 2008-2009 CBR1000RR in the open box I saw!

paul13131313 · July 29th, 2010, 11:42 PM

Also,exhaust is original version,reasonobly quiet,was tested with O2 sensor over entire rpm range,without power commander,with no rich or lean issues.I'll just have to clean that yellow "soot" off of silver swingarm.

**JohnnyComeLately** · July 30th, 2010, 01:14 AM

**MikeR** · July 30th, 2010, 04:13 AM

no pics me no understand.

paul13131313 · July 30th, 2010, 06:03 AM

Picture at Taylormade Racing ,at GSX-R
1000,shark guard.

**Repsol Robert** · July 30th, 2010, 02:36 PM

We want a pic of it installed on your bike... get that camera phone goin'...

**Radical Rich** · July 30th, 2010, 06:20 PM

**JohnnyComeLately** · July 31st, 2010, 01:23 PM

Quote:

Originally Posted by paul13131313

SPicture at Taylormade Racing ,at GSX-R
1000,shark guard.

Why would I want to look at a picture of a GSXR (although to be fair, it's the best looking 1000 made after 2008 out of all the liter class, Jap bikes)

Quote:

Originally Posted by Repsol Robert

We want a pic of it installed on your bike... get that camera phone goin'...

Quote:

Originally Posted by Radical Rich

paul13131313 · August 19th, 2010, 07:17 PM

Have smartphone with ability to send picture to web address.How do I send them to here?

**MikeR** · August 19th, 2010, 08:41 PM

no pics...smells like a 1 week ban coming up.

**JohnnyComeLately** · August 19th, 2010, 09:47 PM

If it's a smart phone, you should be able to email it to your self. Save to a location you can find (Desktop), and then come here. Click "Reply", and type out your humble apologies to the hundreds of views who didn't get to see a pic yet, and then scroll down to "Manage Attachments" Click on that and wait for the little pop up. The first section allows you to "Choose" the file, and then cilck to upload. When done, close out the pop up, and you'll see there's a file name appearing below your typed out reply.

Ban Hammer...hm....I wonder if BK even knows where he put it or how to use it

paul13131313 · August 19th, 2010, 10:23 PM

Thanx John,
I'll be uploading albums once I learn this.

f4ighter · August 20th, 2010, 06:11 AM

think paul has them up for sale on the site already. ................i think

http://www.racetaylormade.com/tmpage...s.html#R6crash 1/4 way down the page

July 29th, 2010, 11:22 PM	#1
paul13131313 Rookie Member Join Date: Apr 2009 Location: Pasadena.Ca. Posts: 134 Name: Paul VIN: 09/0058	CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD Found one on Taylormade Racing site for2009 GSX-R and called to find out if it fits 2009 CBR1000RR.Went over for fit check (work 5 miles away) and found bolt hole near edge of tab.Paul took phone number and said he'd call in a couple of weeks when untrimmed part is ready. Called two days later to come over for fitting.He trimmed an existing part,let me mark the hole placement,drilled the hole,checked fit ,made final fit and finish adjustments,and let me install it for the last time..He took pattern measurements to produce more. I have no interest in drilling holes on swingarm and have seen this design in thick sheetmetal also.while looking for it ,I came across this. It cost $71.34 and neither Kristie (email phone/contact) or Paul himself would accept any extra for the master's hour of cheerfull adjustment.He remarked "that's the fun part!". Oh,and by the way,theirs dozens of exhaust components being assembled for shipment,yes 2008-2009 CBR1000RR in the open box I saw! __________________ Energy seat,seat cowl,LP cf look frame sliders:frt & rear,Honda racing license plate bracket,Honda Repsol hugger,passenger pegs removed,decals installed,tank and swingarm stickers removed,BT016's,R&G tail tidy,TM cf shark fin,Renntec sport rack,Emgo travel trunk.

July 29th, 2010, 11:42 PM	#2
paul13131313 Rookie Member Join Date: Apr 2009 Location: Pasadena.Ca. Posts: 134 Name: Paul VIN: 09/0058	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD Also,exhaust is original version,reasonobly quiet,was tested with O2 sensor over entire rpm range,without power commander,with no rich or lean issues.I'll just have to clean that yellow "soot" off of silver swingarm. __________________ Energy seat,seat cowl,LP cf look frame sliders:frt & rear,Honda racing license plate bracket,Honda Repsol hugger,passenger pegs removed,decals installed,tank and swingarm stickers removed,BT016's,R&G tail tidy,TM cf shark fin,Renntec sport rack,Emgo travel trunk.

July 30th, 2010, 01:14 AM	#3
JohnnyComeLately As seen on page 56 Join Date: Apr 2007 Location: San Diego, CA Posts: 3,028 Name: John VIN: 2007 / 00142	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD __________________ Holy jumping Stone Ages, Batman! Is that guy really riding a donkey down the street? Yes, Robin. Welcome to the hellhole named Afghanistan.

July 30th, 2010, 04:13 AM	#4
MikeR Super Member Join Date: Apr 2008 Location: Edenvale, South Africa Posts: 3,929 Name: Mike VIN: 07/09190	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD no pics me no understand. __________________ Ride it like you stole it. "Stupidly Quick, Underdressed, Ignorant and Dangerous" *Nicky Hayden Tissot Watch, Limited Edition 2007 No 02489*

July 30th, 2010, 06:03 AM	#5
paul13131313 Rookie Member Join Date: Apr 2009 Location: Pasadena.Ca. Posts: 134 Name: Paul VIN: 09/0058	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD Picture at Taylormade Racing ,at GSX-R 1000,shark guard. __________________ Energy seat,seat cowl,LP cf look frame sliders:frt & rear,Honda racing license plate bracket,Honda Repsol hugger,passenger pegs removed,decals installed,tank and swingarm stickers removed,BT016's,R&G tail tidy,TM cf shark fin,Renntec sport rack,Emgo travel trunk. Last edited by paul13131313; August 19th, 2010 at 07:12 PM. Reason: delete character

July 30th, 2010, 02:36 PM	#6
Repsol Robert Repsol Hooligan Join Date: Jan 2007 Location: East Bay, CA Posts: 2,005 Name: Robert VIN: '08 Custom Nicky Replica	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD We want a pic of it installed on your bike... get that camera phone goin'... __________________ Get your Taylormade Goodies at www.racetaylormade.com ...

July 30th, 2010, 06:20 PM	#7
Radical Rich Permanent Junior Member Join Date: Oct 2007 Location: Charlotte NC Posts: 2,568 Name: Rich VIN: 2007/0980	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD __________________ Talk is cheap mods are not! Jardine C/F exhaust. Pazzo levers. C/F front and rear chain guards,tank guards,heatshield, and rear hugger. Limoto seat covers. Rizoma grips, and TI resvs. C/F intake BMC race filters. Flapper mod, pair mod, pcm3, Gilles rearsets, chain adj with lifts. Ya, it's an 07 top of the food chain. + a Ducati 848 Hayden Edition.

August 19th, 2010, 07:17 PM	#9
paul13131313 Rookie Member Join Date: Apr 2009 Location: Pasadena.Ca. Posts: 134 Name: Paul VIN: 09/0058	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD Have smartphone with ability to send picture to web address.How do I send them to here? __________________ Energy seat,seat cowl,LP cf look frame sliders:frt & rear,Honda racing license plate bracket,Honda Repsol hugger,passenger pegs removed,decals installed,tank and swingarm stickers removed,BT016's,R&G tail tidy,TM cf shark fin,Renntec sport rack,Emgo travel trunk.

August 19th, 2010, 08:41 PM	#10
MikeR Super Member Join Date: Apr 2008 Location: Edenvale, South Africa Posts: 3,929 Name: Mike VIN: 07/09190	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD no pics...smells like a 1 week ban coming up. __________________ Ride it like you stole it. "Stupidly Quick, Underdressed, Ignorant and Dangerous" *Nicky Hayden Tissot Watch, Limited Edition 2007 No 02489*

August 19th, 2010, 09:47 PM	#11
JohnnyComeLately As seen on page 56 Join Date: Apr 2007 Location: San Diego, CA Posts: 3,028 Name: John VIN: 2007 / 00142	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD If it's a smart phone, you should be able to email it to your self. Save to a location you can find (Desktop), and then come here. Click "Reply", and type out your humble apologies to the hundreds of views who didn't get to see a pic yet, and then scroll down to "Manage Attachments" Click on that and wait for the little pop up. The first section allows you to "Choose" the file, and then cilck to upload. When done, close out the pop up, and you'll see there's a file name appearing below your typed out reply. Ban Hammer...hm....I wonder if BK even knows where he put it or how to use it __________________ Holy jumping Stone Ages, Batman! Is that guy really riding a donkey down the street? Yes, Robin. Welcome to the hellhole named Afghanistan.

August 19th, 2010, 10:23 PM	#12
paul13131313 Rookie Member Join Date: Apr 2009 Location: Pasadena.Ca. Posts: 134 Name: Paul VIN: 09/0058	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD Thanx John, I'll be uploading albums once I learn this. __________________ Energy seat,seat cowl,LP cf look frame sliders:frt & rear,Honda racing license plate bracket,Honda Repsol hugger,passenger pegs removed,decals installed,tank and swingarm stickers removed,BT016's,R&G tail tidy,TM cf shark fin,Renntec sport rack,Emgo travel trunk.

August 20th, 2010, 06:11 AM	#13
f4ighter Novice Member Join Date: Oct 2009 Location: mary-land Posts: 297 Name: mike VIN: 00868	Re: CARBON FIBER,FRAME SAVER MOUNT,SHARK GUARD think paul has them up for sale on the site already. ................i think http://www.racetaylormade.com/tmpage...s.html#R6crash 1/4 way down the page __________________ Bad news, its open season on chumps and I just got my permit. -07 Repsol- its orange and fast. giggity -02 F4i Streetfighter- it wins trophies and sh1t

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode