|
July 2nd, 2009, 10:58 PM
|
#1 |
|
New Member
Join Date: Dec 2008
Location: australia
Posts: 21
Name: Andy
|
Help needed with radiator mounting
Hi guys I have just recoverd from a recent accident which I had on my Repsol CBR and now its time to put her back together one part which i got a bit stuck on was mounting the neck of the radiator to the mount which mounts it to the frame, by neck I mean the part where the two hoses attach to and the radiator cap screws on My bracket is either bent or I am missing somthing. My repsol is a 1000cc repsol fireblade 07 model.
The way that i was trying to mount the neck is the overflow bottle mounts inbetween the neck and the mount for the frame and a bolt goes through the neck then the overflow bottle and then into the radiator mount bracket. If someone could confirm that this is the correct way that would be great. Thanks Andy |
|
|
|
July 3rd, 2009, 01:41 AM
|
#2 |
|
Snappy Title Pending
Join Date: Mar 2008
Location: Adelaide, Australia
Posts: 3,245
Name: Alex VIN: 07/0566
|
Re: Help needed with radiator mounting
I'm stripping my 07 to put it back to stock for a defect inspection tomorrow so while the plastics are off I'll take a few pictures for you!
__________________
 AALLRRIIGGHHTT.... |
|
|
|
|
July 3rd, 2009, 04:29 AM
|
#3 |
|
New Member
Join Date: Dec 2008
Location: australia
Posts: 21
Name: Andy
|
Re: Help needed with radiator mounting
OK thanks
|
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
